SPA 3 Month Water Care Kit

0 reviews / Write a review

$95.68

Product Code: eco-8036

Qty

ecoone Spa Basic Kit contains everything you need to maintain your spa for 3 full months. Works with most sanitizing systems

The convenient ecoone® SPA 3 Month water care kit contains everything you need to fully maintain your spa for each three month fill cycle (including ONEShock Sanitizer!) using the minimum amount of chemicals possible.

- No More Spa Itch
- No More Rashes
- No More Bathing in Chemical Soup!

Kit Includes:
3 – 8 oz. Bottles of ecoONE Spa Monthly
1 – 8 oz. Bottle of ecoONE Filter Cleanser
1 – 1 Lb Bottle of OneShock™ Sanitizer Packets
FREE! Test Strips

ecoone® Pool & SPA water care products are not only the easiest to use, they are some of the safest water treatment products on the market today. Our easy-to-use products will replace and reduce your need for the vast majority of your water care chemicals and just plain put the fun back into owning a pool or spa!

Directions For Use: Spa Monthly - Fill spa and heat to normal operating temperature. Add sanitizer. Balance alkalinity, then pH. With jets and blowers running, add one bottle of ecoone® SPA monthly directly to spa water. It is good practice to shock your spa weekly or as needed. Use one full bottle of ecoone® SPA monthly every 30 days. Filter Cleanser - Combine one to two caps full of ecoone® FILTER cleanser with up to five gallons of water. Agitate filter to loosen contaminants and allow to soak for at least one hour. Rinse filter thoroughly with fresh water. OneShock™ - With jets running, add one, oneshock™ dissolving packet per 250 gallons of water. Wait 5 minutes, then check chlorine residual. Residual chlorine should read between 2 to 3 ppm.

Super-Chlorination: It is good practice to super-chlorinate each 2 to 4 weeks. To super-chlorinate, add 1/2 oz. (two, oneshock™ dissolving packets) of oneshock™ for each 250 gallons of water. Thoroughly clean spa, vacuum and cycle through filter. Resume program when chlorine residual reads 2 to 3 ppm. This product should be added daily or as necessary to achieve and maintain 2 to 3 ppm residual chlorine. Frequent checks should be made of residual chlorine using a reliable test kit. Allow at least 5 minutes mix time before sampling.

Technical Specifications:

Appearance: Opaque liquid / Free-flowing powder / Dissolving packets

pH range: Neutral

Fragrance: Neutral. None added.

Available sizes: 3 - 8 oz. Monthly, 1 – 8 oz. Filter Cleanser. 1 – 1Lb OneShock™

Ingredients:

Monthly - No ingredients hazardous to humans, animals or plants per CFR 1910

Filter Cleanser - Sodium metasilicate, sodium percarbonate, sodium borate and non-ionic detergents

OneShock™ - Sodium Dichloro-Triazinetrione Dihydrate (Di-Chlor) EPA 7364.-80

Handling and Storage:

Store in a cool, dry place. To maintain product quality and freshness, do not expose to extreme temperature fluctuations, allow the product to freeze or be exposed to prolonged temperatures in excess of 90º F.