Raypak Hi Delta Commericial Pool Heater w/Cold Water Run Natural Gas 1260k BTU Cupro Nickel Low NOx

Hi Delta Pool Heater P-1262B

The Hi Delta line of fan-assisted combustion units offer solid performance and flexible controls with easy-to -understand diagnostics.

FREE LOCAL DELIVERY ONLY - PLEASE CALL US FOR SHIPPING RATES

Features:

• All models indoor/outdoor certified
• Models 992B - 1802B certified to ANSI Z21.56. Models 2002B - 2342B certified to ANSI A21.10.3
• Vertical vented as category I, sidewall vented as category III
• Efficiency
  • 85% Standard
  • 98% Condensing system available on models 992B - 2072B (CHX Option)
• Patented burner "security blanket" enhances staged combustion, minimizes installation and start-up issues, and protects burners from metal fatigue
• Cupro-nickel finned-tube heat exchanger with brass headers; AB 1953 low-lead compliant
• Sidewall venting capable: No extractor needed for most applications. An extra part is needed for horizontal venting
• Ducted combustion air reaady: "TruSeal CSA-certified direct-vent available
• Status display and on-board diagnostic center, real English, no codes.
• Models 992B - 2002B certified to SCAQMD rule 1146.2. Meets all low NOx regulations
• All models except 2002B available in natural gas and propane. Model 2002B available for natural gas only
• All models natural and propane go up to 5,000 feet elevation. For anything above 5,000 feet, please call for special order

PLEASE CLICK ON THE LINKS BELOW FOR MORE INFORMATION

BROCHURE OWNERS MANUAL CERTIFICATION WARRANTY SPEC SHEET

Control Options

Bypass Options:

• The standard external bypass uses a thermostatically-controlled valve to adjust bypass flow and achieve cold-water protection
• All units available without an external bypass; cold-water protection provided in the field
• The Cold Water Run (CWR) option provides electronic control of a variable-speed pump to continuously adjust bypass flow, achieving realtime cold-water protection

Cold Water Start

Cold Water Run

 

For the same reason stated for Cold Water Starts, it is even more important to provide protection against condensation from cold inlet water on systems where the return water temperature to the boiler will always be below the acceptable minimum. Raypak’s Cold Water Run system utilizes a variable-speed pump to inject just the right amount of water from the main system loop into the boiler to maintain the optimum inlet temperature. This approach allows the full capacity of the boiler to be utilized to meet the system load, while at the same time continuously maintaining the optimum inlet water temperature to prevent condensation.

 

On-Board Diagnostic Center

Raypak's Hi Delta (302B thru 2342B) comes equipped with a microprocessor-controlled diagnostic control center that displays its information on a 2x20 character LCD display in plain English. This control monitors ystem safeties, ignition faults and sytem status, while storing up to 16 reported faults. Raypaks diagnostic center also monitors the fault outputs of the Fenwal ignition control. The Fenwal's flash codes are converted into real English fault codes that anyone can understand. The control is also equipped with a SPDT dry contact relay output that is switched anytime a safety fault occurs. This can be used for a heater alarm or a BMS safety interface.

Diagnostic Information

Safety Faults

• Manual High Limit
• Auto High Limit
• Low Water Cut-off
• Vent Pressure
• High Gas Pressure
• Low Gas Pressure
• Controller Alarm
• Flow Switch
• Blower Switch
• Factory Option
• External Interlock
• Cold Water Run

Ignition Control Faults

• Low Air
• Flame - No CFH
• Ignition Lockout
• Low HSI Current
• Low 24VAC
• Internal Control Fault

 

1. Lightweight Refractory Panels

Multi-peice ceramic fiber panels enhance combustion while minimizing heat retention

 

2. Fully-enclosed Headers

Temperature sensors and lead wires/capillaries are protected from weather, vandalism, and accidental damage during installation and service

 

3. Flue Connection

Top or back outlet flue connections offer greater installation flexibility

 

4. Air Filter

An easily-cleaned combustion air filter protects the burners from airborne particles including flying insects.

 

5. On-Board Diagnostic Center

Factory mounted standard equipment (302 - 2342). Gives relevant service feedback as well as possible solutions to clear the fault. All in plain English, no cryptic codes to decipher. The control stores up to 16 fault codes in its history file for the service technician to review.

 

6. Status Display Lights

Up to 12 high-density LED lights, visible up-front, indicate the operating status of the boiler.

 

7. Construction

The cabinet and all internal parts are made from galvanized, aluminized or stainless steel. The exterior is protected by textured powder-coat paint, ideally designed for indoor or outdoor installations.

 

8. Central Point Wiring

Factory-made wire harnesses connect all electrical components to an easy-to-troubleshoot circuit board with multi-pin connectors.

 

9. Heat Exchanger Tubes

Time-proven copper finned tubes and optional cupro-nickel tubes stand up to even the harshest water conditions.

 

10. Burners

Special stainless steel alloy pre-mixed burners provide clean, robust combustion and meet all low NOx regulations.

 

11. HSI Access Panel

A small panel provides access to both the hot surface igniter and the flame sensor to aid inspection and service