Filter Perfect is a highly concentrated deep cleaning solution that removes build up caused by; oils, grease, non-living organics, and more on filters. It is very effective on cartridge elements, DE filter grids, and sand filters. Filter Perfect improves filter efficiency and lengthens cycles between filter cleanings.
Directions for use:
Cartridge Elements or DE filter grids
1. Remove cartridge elements or DE grids from filter tank and hose off loose
material
2. In a pail, bucket or trash container with 5-10 gallons of water, add 1L bottle of
Filter Perfect
3. Place cartridge elements or DE grids in solution and soak for a minimum of 6
hours (preferably overnight)
4. Remove from solution and rinse thoroughly
Note: Clean cartridge elements should be allowed to dry before re-installing
Sand Filter
1. Have pump running and filter in backwash mode. Suction should come
primarily from skimmer, not main drain
2. Add 1L bottle of Filter Perfect to skimmer
3. Once contents of bottle have entered the filter, turn pump off and put valve in
either close or filter position, for a minimum of 6 hours
4. Turn pump on with filter set to backwash, run until water flows clear (Do NOT
allow pump to run dry)
5. Return filter to normal operation