Spa Purge Plumbing Cleaner 33.9oz

Spa Purge attacks the root cause of most spa maintenance problems, the build-up of non-living organic waste contamination! Non-living organic contaminants such as; oils, lotions, cosmetics, hair products and sweat build-up in spa water produces waterline rings, cloudiness, clogged filters, unpleasant odors and foaming. These non-living contaminants collect and build-up in your spa, circulation system, and filter. By purging the spa of this non-living organic build-up, the symptoms of contamination will be reduced or eliminated.

Directions for use:

1. Remove cartridge filter elements

2. With spa water temperature at 95 degrees or higher, add entire contents of 1L
Spa Purge bottle to spa water

3. Run jets a minimum of 5 minutes. (Note: if excessive foaming occurs, turn jets
off)

4. Maintain water temperature and allow spa to circulate overnight with jets off

5. Drain, rinse and then re-fill spa and re-install filter elements. Proceed with
normal spa maintenance

Note: For jetted tubs, use 1/2 bottle of Spa Purge