HAMMER-HEAD RESORT-30 UNIT COMPLETE INCLUDES CHARGER

HAMMER-HEAD RESORT-30 UNIT COMPLETE INCLUDES CHARGER

0 reviews / Write a review

$2,074.96

Product Code: RESORT-30

Qty

FREE GROUND SHIPPING

Drop Ship direct from manufacturer (4 weeks)
Model - SERVICE-30 Unit Complete with Charger (NO MOUNTING)
Resort-30 units are meant to be left on site and the caddy carts are not compatible with our vehicle mount assembly

The HAMMER-HEAD 30 inch Vac Head gives you maximum vacuuming power in a small, lightweight, portable package. It's what sets our cleaner apart from conventional vacuum systems. Our 12-volt rechargeable unit has you cleaning immediately without the usual set-up and run-around.

WHAT WILL IT DO?
Just lower it into the water and turn it on. The patented pressurized motor can entirely recirculate the average pool in under an hour, and vacuum it clean in under ten minutes. Sand, sticks, leaves, and even coins are pulled into the high capacity debris bag, reducing the number of filter cleanings. You'll use less effort, too.

WHAT WON'T IT DO?
Hammer-Head units equipped with a standard debris bag can vacuum up large leaves, coarse sand, sticks, mulch, small gravel and even some coins. With a superfine debris bag HH1508) or ultra-fine volcano bag (HH1510), you'll be able to pick up almost all finer silt and dust. It will not filter algae out of the water, and it is not a complete substitute for the pool's filtration system or filtration vacuuming. There will be cases where the filtration system is the best way to lean the pool. But for all other cases, however, the advantage to using the Hammer-Head is that the debris goes into the bag, it stays out of the filter system. This means fewer filter cleanings, and less strain on the pool equipment.

WHY WOULD I WANT TO USE ONE?
Hammer-Head can help you increase your profitability. In the pool business, time is definitely money, and the rapid setup and working speed of a the Hammer-Head unit will cut your pool vacuuming time by as much as 50%. If your goal is to shorten your workday, or if you want to take on more work, you will save time with a Hammer-Head.
What is your time worth to you? In the maintenance business, time really is money, and any tool that saves you time is an investment in your own profitability. Faster cleaning times means more pools can be serviced in a day, leaving time for repair work or opening new accounts. Your Hammer-Head will pay for itself in time savings alone and will leave you wondering how you ever got by without one.

DO I HAVE TO BE TRAINED TO OPERATE IT?
A Hammer-Head isn't that much different than your household vacuum cleaner. The cart is balanced, rolls easily over most terrain, and carries most of what you need in one trip. You'll expend less energy on the job. Just attach a standard pool pole, lower it into the water, and turn it on. It's that easy.

IS IT SAFE FOR VINYL LINER POOLS?
Yes. The Hammer-Head vacuum head has over 1" of clearance from the pool bottom, so scuffing or tearing a liner is not an easy thing to do. And because the Hammer-Head vacuum head design has wheels on the outside of the head, they protect it from making contact with the liner. The Hammer-Head suction is very powerful, but it can't lift the liner off the bottom because it's not close enough to it. We also make a brush attachment for the 21" head that lifts the vacuum off the bottom on firm brush bristles. It will change the steering, but raise the clearance even more.

NOT INCLUDED:

12 VOLT DEEP CYCLE MARINE BATTERY
STANDARD POOL POLE

SPECIFICATIONS:

21" OR 30" INJECTION MOLDED VACUUM HEAD
NON-MARKING, BEARING-LESS, CAST URETHANE HEAD WHEELS
STAINLESS POLE SWIVEL MOUNT (two position adjustable angle standard on the Resort-30)
ALL STAINLESS HARDWARE
*MARINE GRADE ON/OFF SWITCH OR THE NEW SMART SWITCH™ (The new Smart Switch is in limited release for 2017 or is available by request.)
NOCO GENIUS BATTERY CHARGING PORT (compatible with HH1900 Noco Genius Charger G7200)
NOCO GENIUS G7200 CHARGER (Now included on all Resort Units for 2017)
30# THRUST PRESSURIZED MOTOR
60FT FLOATING POWER CORD
THREE BLADE PROPELLER
WELDED ALUMINUM CADDY CART
20" MAG BMX-STYLE CART WHEELS
NON-MARKING SOLID TIRES
STAINLESS WHEEL BEARINGS
TWO DEBRIS BAGS (HH1506 AND HH1508)
DIMENSIONS: 26" CART WIDTH, 46" OVERALL HEIGHT, 27" FRONT TO BACK DEPTH
RESORT-21 WEIGHT WITH 27 SERIES MARINE BATTERY: 105 LBS
RESORT-30 WEIGHT WITH 27 SERIES MARINE BATTERY: 107 LBS
21" VACUUM HEAD & MOTOR WEIGHT: 11 LBS
30" VACUUM HEAD & MOTOR WEIGHT: 13 LBS

WARRANTY

Hammer-Head Patented Performance, Inc. offers either a limited 6 month or 12 month warranty on select serialized products. Your Hammer-Head serial number (where applicable) must be registered with Hammer-Head Patented Performance, Inc. to validate any warranty claim. The serial number located on any motor/cord assembly, complete cleaning unit, or complete vacuum head assembly is a record of the manufacturing date. If you do not register immediately after purchase, Hammer-Head Patented Performance, Inc. will offer a limited 6-month warranty from the date of manufacture. If you do register immediately after purchase, Hammer-Head will offer a limited 12-month warranty from the date of your registration according to the requirements as stated on the warranty registration card. This warranty covers manufacturing defects on complete units, motors, switches, mount assemblies, and cart frames. It does not cover wear and tear from normal use nor does it cover wearable parts. Wearable parts include debris bags, bearings, tires, wheels, cords, and propellers mount clamp latches and all associated hardware. Hammer-Head units must only be used on electric current as indicated. Damage, defects, malfunctions, or other failures of the Hammer-Head arising from use on electrical currents other than recommended are excluded from this warranty.

Write a review

Your Name

Your Review

Note: HTML is not translated!

Rating Bad Good

HAMMER-HEAD RESORT-30 UNIT COMPLETE INCLUDES CHARGER

Write a review

HAMMER-HEAD SERVICE-30 UNIT COMPLETE INCLUDES CHARGER AND MOUNTING