Your shopping cart is empty!
The Acu-Trol AK600 controller is the most advanced multiple pool controller available, providing the ultimate in equipment room automation. Up to sixteen output relay combinations, configurable for up to six types of control. The Acu-Trol AK600 controller can be customized for any facility, with voltage-configurable control relays and bi-directional control, database information options accessible via direct link, dial-up, wireless modem and ethernet connectivity. With control of chemicals, pumps, filters, heaters, air handlers, chloramine reduction systems and the ability to interface with building management systems for up to 3 bodies of water, the Acu-Trol AK600 controller completes any aquatic facility.
• AcuCom™ Software • Multiple pool control for 1, 2 or 3 pool configurations • Programmable pH, ORP and temperature set points • Programmable proportional feed for precise chemical feed • Programmable acid, CO2 or base feed for pH control • Auto backwash filters for up to two bodies of water • Flow cell with built-in flow switch, shut-off valves, inlet strainer and sampling port • 16 relays with three (3) voltage configurations
Features:
• Sensors The Acu-Trol AK600 controller sensors are capable of measuring ORP, pH, free chlorine, conductivity, temperature, flow rate and pressure
• Flow Cell The AK1200™ Flow Cell offers inlet and outlet valves for sensor protection and third outlet for ease of water sampling
• Relays Customized relay control for up to 96 combinations
• Colorimetric Compatible Compatible with the AKColor Colorimetric PPM sensing measurement system for free and total chlorine
• Readings The Acu-Trol AK600 controller displays the Puckorius, Langelier or Ryzner indexes and differential influent and effluent pressure
• Data Recording In the absence of power, the Acu-Trol AK600 controller will retain programming information, calibration, and recorded data
• Alarms Alarms are activated by sensor measurements and will communicate at two hour increments until alarm is cleared
• Communication The Acu-Trol AK600 controller communicates using the AcuCom™ and AcuManage II software. Software packages provide wireless communication with modem modules
• Security Password protected allows limited access 3 levels with 7 unique passwords PROGRAMMABILITY
• ORP calibration • pH, ORP and temperature set point • ORP super-chlorination • PPM control • Temperature calibration • Proportional feed • Feeder ON and OFF times • Mix times and cycle times • Overfeed lock out times • Acid/Base feed pH control • Auto backwash filter settings • Water level ALARMS • pH Alarms
pH set point ± percentages Overfeed disables pH feed Flow switch disables pH feed High pH disables sanitizer feed • ORP Alarms ORP set point ± percentages Overfeed disables disinfectant feedFlow switch disables feed • Auto probe clean • 16 pager numbers • 7 passwords
The controller shall be covered by a standard manufacturer warranty of five (5) years. All pH and ORP sensors will be covered by a two (2) year warranty. Flow Cell will be covered by a one (1) year warranty. This warranty extends to the original retail owner only, beginning on the date of installation, and is not enforceable by any other party. Proof of purchase and/or date of installation will be required to execute a warranty claim. Warranties by Others: Some products incorporate components manufactured by other manufacturers. Some of these provide warranties in addition to the warranty provided herein. In all such cases, a copy of that warranty will be provided with the product. To the extent protection provided under any such third party warranty exceeds the Limited Warranty provided herein, the Customer will have to look to that manufacturer for the additional warranty protection.
Owner's Manual